This complete engine oil filter assembly can be installed on all L-4-134 flat head engines. This assembly includes a new Fram PB50 spin-on throw-away filter, the oil filter mounting bracket on the cylinder head, the oil filter mounting bracket to the cylinder head bracket. The three cylinder head bolts, three cylinder head nuts and washers for use with the cylinder head studs, an oil inlet hose and an oil outlet hose. The spin-on oil filter base with the jam nut and two brass hose fittings attach to the spin-on mounting bracket and the brass fitting on the side of the block are included.

This oil filter assembly can be installed on the MB/GPW/CJ-2A/CJ-3A/M38/DJ-3A and all VJ Jeepsters, Utility Wagons and Utility Trucks with flat head L-4-134 engine.

FILTER, OIL ASSEMBLY, SPIN-ON, THROW-AWAY TYPE, FRAM USA BRAND.

BRACKET SPIN-ON OIL FILTER MOUNTING, MOUNTS TO BRACKET ON CYLINDER HEAD, MADE IN THE USA BY WJP.

*NOTE-THIS BRACKET IS ONLY SOLD AS PART OF THE COMPLETE OIL FILTER KIT.

BRACKET, ENGINE OIL FILTER MOUNTING, MOUNTS ON CYLINDER HEAD.

MOUNTING KIT, BRACKET TO CYLINDER HEAD.

MOUNTING KIT, BRACKET TO BRACKET

BASE, SPIN-ON OIL FILTER, CAST ALUMINUM, FRAM TYPE.

JAM NUT, SPECIAL, OIL FILTER, BASE TO OIL FILTER BRACKET, THIN HEX, BLACK OXIDE STEEL, INCLUDES STAINLESS STEEL LOCKWASHER.

OIL HOSE, INLET, 22 1/2" LONG, WITH TWO MALE FLARED ENDS, SWIVEL AT BOTH ENDS, ATTACHES LEFT SIDE OF ENGINE BLOCK AND OFFSET HOLE ON OIL FILTER BASE.

CLIP AND LOOM, OIL INLET LINE TO FRONT ENGINE PLATE, INCLUDES THE PROTECTIVE CLOTH LOOM, 1/2" DIA., WITH 3/8" BOLT HOLE.

OIL HOSE, OUTLET, 9 1/2" LONG, WITH TWO MALE FLARED ENDS, SWIVEL AT BOTH ENDS, ATTACHES  TO CENTER FITTING ON OIL FILTER BASE AND ENGINE TIMING COVER.

ELBOW, 90°, BRASS, OIL FILTER INLET, ONE AT LEFT SIDE OF ENGINE BLOCK IN FRONT OF FUEL PUMP, ONE AT OFF SET HOLE ON OIL FILTER BASE, 2 REQD.

ELBOW, 45°, BRASS, OIL FILTER OUTLET, CENTER OF OIL FILTER BASE.